热门产品   Hot
2015/11/23
QJB Series sub
2015/11/23
On behalf of t
2015/11/23
Small mixer
2015/11/23
Static mixer
2015/11/23
Parallel shaft
搜索   Search

On behalf of the blade technology

更新:2016-01-26 19:16:06      点击:
  • 产品品牌   
  • 产品型号   
  • 产品描述

    On behalf of the celebration of various types of blade has a high efficient and reliable performance...

产品介绍

On behalf of the celebration of various types of blade has a high efficient and reliable performance, has become the various hybrid processes preferred through proprietary technology, a comprehensive analysis of all the process parameters, to ensure the correct choice of blade, ensure each process to achieve the best mixing effect.

According to the flow pattern generated by the blade, the blade can be divided into axial flow blade and blade. Axial-flow impeller fluid can be produced under cycle, suitable for the fluid mixing, suspended solids and gas mixing process; radial flow impeller and radial drainage, suitable for high viscosity fluid mixing, shearing and gas dispersion process.

EI-3 - a high performance axial flow blade that can produce more fluid

MP-3 - an advanced marine propeller

-4 PB - a suction solid / liquid axial flow blade

RT-6/C - a radial flow paddle used to disperse the gas

DSX - a decentralized device for high shear

FT-2 - a folding blade for standard 200L turntable

And more......

EI-3 blade - a new type of high efficiency axial flow blade, its discharge performance is good, low shear stress. Convective circulation state presented at low speed and high speed is turbulent dispersion state, larger leaf angle and blade twist to the mixer in the transition flow and turbulence to attain higher flow field, the liquid capacity than traditional push type mixing machine is increased by 35%, has the advantages of high efficiency, low energy consumption, low shear, a liquid discharging quantity high; suitable for low viscosity liquid mixing, heat transfer, suspended solids, absorption, dissolution process, can be connected with bolts, easy installation, can be large.


MP-3 blade -Axial flow type marine propeller blade with high circulating rate and small shear force, it has a very strong axial circulation when equipped with a flow guide tube. Suitable for low viscosity liquid mixing, heat transfer, solid suspension, absorption, dissolution, etc..


FT-2 bladeFolding blade. Standard 2 "opening bucket, dispersible folding


PB-4 blade -Traditional shaft flow type blade, with low shear stress and turbulent diffusion properties, compared with the traditional six straight blade disk turbine mixer, in the same power consumption, improve mass transfer coefficient of 30%, the same stirring intensity of 60% of the energy, viscosity changes in a wide scope of application, application requires a shear capacity of liquid mixing and suspended solids, dissolved oxygen in fermentation process, small use of welding technology, large available bolt connection, easy to install. .


RT-6C blade- radial flow impeller is in a high-speed mixer mixing intensity is the strongest and the maximum power dissipation of a blade, large shearing force, dispersion ability, can form two circulating shares circulation, gas in the disk under the action of dispersed more smooth and uniform, especially for the high requirements of the gas dispersion, absorption, for suspended solid, heat transfer and non uniform reaction operation and suitable viscosity range is wide.


DSX blade -Diameter flow impeller, serrated leaves, great shearing force, using high-speed turbulent state, with special dispersion, applicable to high shear, dispersion, emulsification, dissolution operation, are widely used in paint industry, paper making industry.


DS propeller bladeAxial flow blade, single threaded blade, double helical blade, the general material along the vessel wall spiral upward, and then to the center of the confluence, the formation of the upper and lower convection cycle. At the same time has a strong anti - effect. Suitable for mixing, heat transfer and reaction solution of high viscosity or powder materials. Under normal circumstances, large diameter, liquid height with double screw, small diameter should be used single screw.


DA anchor frame type blade Low speed flow pattern, various forms of frame type mixer can adapt to various geometric shape of the container. Stirring in a horizontal annulus flow based, depending on the location of the beam and the vertical rod can be increased vortices in the blade near the, expand the mixing range, generally under the laminar flow condition for in low-speed high viscosity liquid level any changes in mixing, heat transfer, dissolution and mass transfer and reaction operation, increasing with wall scraping device can solve the problem of sticking wall, for internal support other blades can achieves the best mixing effect.



更多产品